Skip to product information
ADAM'S ONE STEP METAL POLISH
  • ADAM'S ONE STEP METAL POLISH
  • ADAM'S ONE STEP METAL POLISH
ADAM'S ONE STEP METAL POLISH

ADAM'S ONE STEP METAL POLISH

$9.99

Adam’s One-Step Metal Polish is a revolutionary alternative to our dual Metal Polishes #1 & #2 with the intention of combining both steps into one to save time and effort! Adam’s One-Step Metal Polish quickly and effectively produces an extreme shine with minimal effort and rubbing!

  • Polish Aluminum, Chrome, Stainless & Uncoated Metals
  • Specialty Abrasive for Extremely Fine Finishes
  • Designed for Ease and Durability of Consistent Shine
  • Lubricious Formula with Natural and Synthetic Sealers
  • VOC Compliant for ALL 50 States

Along with a blend of specialty abrasives, this formulation contains natural and synthetic sealers that will produce a lubricating effect and generate a highly durable finish that won’t immediately re-oxidize. This metal polish is suitable for a variety of surfaces including stainless, aluminum, chrome, brass, or even acts as an effective plastic polish.

Instructions:

  1. Prepare surface to be polished by cleaning with any of our Adam’s All Purpose Cleaner, Eco-All Purpose Cleaner or even Adam’s Waterless Wash and an Adam’s Waterless Wash towel.
  2. Apply several pea size drops of Adam’s One-Step Metal Polish to a microfiber applicator sponge.
  3. Using light pressure, don’t rub hard, apply in circular motions for 30 seconds to 1 minute and observe black oxidation generated. If no black oxidation is generated, then the surface is clear coated and discontinue use.
  4. When cleaning up the residue from polishing, avoid using brighteners or ammonia-based products and instead reach for Adam’s Waterless Wash or Adam’s CS3 along with an Adam’s Waterless Wash towel to make clean up a breeze!
  5. Fold towel into fourths and wipe down surface, flipping towel to a fresh surface with each subsequent pass.
  6. Repeat steps as necessary until defects and oxidation are satisfactorily removed.

Common Sense Warning:

Adam’s One-Step Metal Polish is not designed for, nor works well on, clear coated metal and great care should be taken when polishing precious metals such as gold or silver plating. It’s recommended to always test in a non-conspicuous area first!
Size

You may also like

As parts age, performance and safety can fade-upgrading prevents small issues from becoming bigger repairs. Choose this Fog Light Cover to restore function without overcomplicating the job.

  • Built to meet original-equipment standards for compatibility
  • Quality materials support long service life
  • Thoughtful design helps with a clean installation
  • Reinforced, heavy-duty construction on key stress points
  • Optimized features for consistent day-to-day performance

In short, this fog light cover helps maintain normal operation so your vehicle performs as expected.

Add your specification content here.

Instructions for Paint & Glass:

  1. Prepare your painted surface or glass by using the supplied 4oz bottle of Adam's Surface Prep and Surface Prep towel to clean and degrease the surface of any existing protection or residual films. For optimal results, users must Wash, Clay/Decontaminate, and Polish their paint prior to application.
  2. Shake coating bottle before use. Open the coating bottle and begin by dispensing numerous drops of the liquid onto the supplied Micro Silk applicator to sufficiently wet it. Work the product into the surface, ensuring full coverage over the desired area, using cross hatching motions and overlapping your previous pass by 25-50%. During your time between passes, utilize Adam's UV Flashlight for inspections. Take note of between the body lines, bumper areas, mirror caps, and commonly missed areas on your vehicle. To ensure a thorough application, the light should shine and reveal an even and consistent bluish hue of light. If you notice streaking in the surfaces, level out with additional product and the used Micro Silk applicator.
  3. Once the recently applied product begins to characteristically flash and sweat into beads, begin wiping the coating off, applying minimal pressure to the towel in the process. Wipe down in a similar cross hatch pattern as applied, switching/flipping the towel periodically to use a new face to fully level the coating.
  4. Once fully leveled, allow the coating to fully cure for 24 hours, free from water, elements, or weathering.

Description

We make things that work better and last longer. Our products solve real problems with clean design and honest materials.