Skip to product information
ADAM'S AIR CANNON JR.

ADAM'S AIR CANNON JR.

$229.99

The most vulnerable time for your vehicle to become scratched is during the drying process! Every time you touch your vehicle with a towel, microfiber accessory, or another drying accessory, you are introducing swirl marks, scratches, and marring to your finish. This state-of-the-art drying accessory provides a high-powered, continuous blast of air to any surface, effectively removing water without any chance of scratching.

  • The safest touch-free drying method available
  • 2.1 HP, 88dB, 100 CFM
  • Includes rubberized attachments, fan tip, and pointed tip.
  • Premium Rubber Swivel Casters
  • 15-foot rubberized power cord
  • Adjustable speed control with slow, safety-start.
  • Self-Expanding and retracting 16.5-foot hose makes clean up a breeze
  • Moves over 4470 feet per minute of clean, warm, dry, filtered air
  • Includes 1 year warranty against manufacturers defects

The Adam’s Air Cannon Jr. is a new, forced air dryer, ideal for drying an entire vehicle in a safe and efficient manner. The Air Cannon cuts drying time significantly and incorporates noise-cut technology for quieter operation. Adam’s Air Cannon delivers heated air in less than 30-seconds. This self-expanding and retracting hose takes up significantly less space than conventional air dryers. This forced air dryer safely removes water, soap suds, and any loose surface contamination without the risk of scratching your finish. The rubberized attachments allow you to get close to the crevices with either a wide fan or pointed tip approach without damaging the surface.

One of the downfalls of using a compressed air system or forced air dryer is the amount of space it takes up in your garage, but not now! The Air Cannon Jr. was designed to get the job done and be smaller to store. Conventional hoses remain expanded and are bulky to store on the wall— With the Adam’s Air Cannon Jr., you start with roughly 5 feet of metal reinforced hose and with one single switch, you’ve expanded your reach to 16.5 feet! Once you’re done, the hose creates its own vacuum and retracts back up for easy storage. The rubberized, swivel casters are smooth and work around the vehicle with ease. Even in the dustiest of environments, this filtered air dryer removes the dust from being blasted onto your vehicle— the filter system cleans in minutes with an easily removable filter cover held in by two plastic spring tabs.

When drying your vehicle, you can reach for a leaf blower or an air chuck attachment for a compressor, but neither are specific for safely and effectively drying your vehicle. A leaf blower does not have a filter and any contaminants floating throughout the air get projected onto your finish. Both a leaf blower and an air chuck from a compressor are loud and noisy for repeated use. An air chuck has a narrow tip that will have you drying for hours! Adam’s Air Cannon simplifies these flaws at a quiet 88 decibels, filtered air, and a powerful 1544W motor with an adjustable speed control! Simply turn the unit on, and dial in your preferred air power effortlessly. At maximum velocity, this air dryer moves air at 4470 feet per minute! This industry-leading air dryer heats air significantly faster than predecessors and features a neoprene reinforced handle that no matter how hot the hose gets, your hands stay safe from the heat.

You may also like

As parts age, performance and safety can fade-upgrading prevents small issues from becoming bigger repairs. Choose this Fog Light Cover to restore function without overcomplicating the job.

  • Built to meet original-equipment standards for compatibility
  • Quality materials support long service life
  • Thoughtful design helps with a clean installation
  • Reinforced, heavy-duty construction on key stress points
  • Optimized features for consistent day-to-day performance

In short, this fog light cover helps maintain normal operation so your vehicle performs as expected.

Add your specification content here.

Instructions for Paint & Glass:

  1. Prepare your painted surface or glass by using the supplied 4oz bottle of Adam's Surface Prep and Surface Prep towel to clean and degrease the surface of any existing protection or residual films. For optimal results, users must Wash, Clay/Decontaminate, and Polish their paint prior to application.
  2. Shake coating bottle before use. Open the coating bottle and begin by dispensing numerous drops of the liquid onto the supplied Micro Silk applicator to sufficiently wet it. Work the product into the surface, ensuring full coverage over the desired area, using cross hatching motions and overlapping your previous pass by 25-50%. During your time between passes, utilize Adam's UV Flashlight for inspections. Take note of between the body lines, bumper areas, mirror caps, and commonly missed areas on your vehicle. To ensure a thorough application, the light should shine and reveal an even and consistent bluish hue of light. If you notice streaking in the surfaces, level out with additional product and the used Micro Silk applicator.
  3. Once the recently applied product begins to characteristically flash and sweat into beads, begin wiping the coating off, applying minimal pressure to the towel in the process. Wipe down in a similar cross hatch pattern as applied, switching/flipping the towel periodically to use a new face to fully level the coating.
  4. Once fully leveled, allow the coating to fully cure for 24 hours, free from water, elements, or weathering.

Description

We make things that work better and last longer. Our products solve real problems with clean design and honest materials.